Search Results

PSC Hand Safety offers a line of hands-off safety tools called taglines. Taglines must be used when the load becomes hazardous or require guidance. Products are PSC Guide-It Safety Rigger Tagline, PSC Safeguider Anti-Tangle Taglines, and PSC LoadGuider Anti-Tangle Taglines. PSC Taglines Taglines or restraint lines must be used when a rotation or swinging of the load may become hazardous or if the load needs guidance. In brief, loads requiring continuous manual guidance while in motion shall be provided with tag lines, and required tag lines must be used “on loads likely to swing or which need guidance”. Get a Quote What is Hands-Free lifting? Hands-free lifting is a vital practice in preventing injuries and enhancing workplace safety. It involves using mechanical lifting mechanisms to handle suspended weights without any direct contact with the body. By eliminating the potential energy in a load before handling it, the risk of hand injuries and related incidents, such as being caught between, struck by, or struck against, is significantly reduced. At PSC Hand Safety, we emphasize the importance of adopting the correct mindset as the primary tool for hands-free lifting. Resisting the urge to touch or hold the rigging while ensuring proper slinging and balance of the load is crucial. Remember, lifting and landing operations pose the highest risks, so maintaining distance from the load is paramount for your safety. What are PSC Taglines? Taglines are also known as guidelines, guide ropes, end lines, strap lines, and pay off lines, depending on where you are in the world, but “Tag line” is the most frequent word for using a piece of rope. When the load’s rotation or swinging may become hazardous, or if the bag requires guidance, tag or safety restraint lines must be utilized. In summary, limitations that require constant manual guiding while in motion must be equipped with taglines, and safety taglines must be used “on loads that are liable to swing or that require guidance.” When must taglines be used? When any of the following events occur, taglines must be used: The static (non-moving) load suspended by the crane swings, or is likely to swing back and forth (due to wind or other external factors), posing a control hazard. It could be a landing and positioning hazard, not just for the crane operator and banksman. The crane or boom movement causes or is likely to cause the load to swing out of control, posing a safety danger. The load is rotating out of control, has rotated out of control, or is likely to rotate out of control, posing a hazard. What are the tagline material options? The load is rotating out of control, has rotated out of control, or is likely to rotate out of control, posing a hazard. Tagline ropes should be made of suitable soft fibers, such as non-rotating synthetic or natural fibers that do not pose the same manual handling risks as wire rope. They should ideally be made of 100% polyester braid on braid (braided core with braided cover) rope, such as the PSC Load Guider® Tagline. Or, like the PSC SafeGuider Tagline, a polypropylene rope coated with urethane compounds to stiffen it. When used as a tagline, a standard polypropylene, nylon, or sisal rope has some inherent problems: They have a tendency to wrap themselves around items. They become entangled in tight spaces. The bottoms fray and are tied to prevent the fraying from catching the line. When they’re wet or soiled with grease, they become slick. Tangle Resistant Tangle resistant as it is designed with a rigid core and stiff cover braiding. Strong Made from SK 75 12 mm with 6 mm core (18 mm) Synthetic Rope Offering Remarkable Strength and Light Weight High Visibility High visibility with its yellow color and color-coded eyes for various lengths Our Product Range PSC Guide It Safety Rigger Tagline PSC launched its new PSC Guide It Safety Rigger Tagline that is made of finest polyester fibers in 14mm diameter with a unique ultra-lightweight 25kN galvanized steel composite swivel hook that opens 2” making it easy to attach to the load and comes with a safety latch. Read More PDF PSC Safeguider High Viz Anti-Tangle Taglines Economical alternative to our Polyex PSC LoadGuiderTM Taglines with high visibility orange coated end for easy safe grip and low light applications. Read More PDF PSC LoadGuider Anti-Tangle Taglines Project Sales Corp has brought in the PSC LoadGuiderTM safety tangle free Taglines to solve the problems associated with the use of PP ropes. These taglines are specifically designed for the hands free lifting applications. Read More PDF Take a step towards improving safety Get a Quote

< Back Hands-Off Tools PSC Load-It Features Light Weight Simple Design Mantains control Keep hands away from injury Custom made S-head/M-head Available in lengths (in feet) - 2, 4, 6, 8, and 10 feet Get a Quote Know More Description The PSC Load-It Positioning Tool can be used for a multitude of jobs like an extension of hand to move, push or reposition nsuspended items and equipment, grab taglines, wire cables or slings, safely guide, maneuver and position loads like gratings, finished steel products mastewr links, flanges and other heavy components. PSC Load-It also ensures relaxed body posturing while usage to reduce the risk of back injuries due to manual load stress. PSC Load-It Mag Head Tool The PSC Load-It Mag Head Tool (PSC-LIT-MAG008) is a 4 feet fiber glass pole with a pivoting magnet (rated for #80 lbs.) to guide steel plates and steel structural products. This is an extendable telescopic pole that extends up to 8 feet long. It has a threaded locking mechanism which can be used to lock at any length until it gets unthreaded induced by a massive push load.

< Back Push/Pull Tools PSC Loadguider Push/Pull Tool Features Extremely lightweight, equipped with an ergonomic non- slip D handle Material - Fiberglass, Plastic, Nylon Tested to 300 kgs Push & 150 kgs Pull Loads Available in 4 lengths 42", 50", 72", 96" Get a Quote Know More Description The PSC LoadGuider Push/Pull Tool helps to mitigate the risk of pinching or crushing hands & feet while handling suspended loads or maneuvering loads in tight positions until the load is in its final placement/resting position. The tool is simple to handle and allows user to guide a suspended load from a distance, either with push or pull activities. The PSC LoadGuider Tool also avoids unnecessary strain on the wrists during maneuvering operations and protects from cuts, pinches, abrasion, lacerations, etc. thus improving hand safety. When handling suspended loads or manoeuvring loads in tight spaces, the PSC LoadGuider Tool helps to reduce the risk of pinching or crushing hands and feet until the load is in its ultimate placement/resting position. The tool is easy to use and allows the user to guide a hanging load from a distance, either by pushing or pulling.

< Back Hands-Off Tools PSC Ezy-Lift Pipe Lifting Tool Features Avoid hand and finger injuries while handling pipes. Sharp edges can cause lacerations and cuts. Lifting from surfaces can cause pinched fingers. Improper lifting can cause body strain. With the PSC Ezy-lift, just slide the tool into the pipe on either end and lift pipes easily, safely and ergonomically. CNC Machined metal plate coated with a rubber black paint and ‘A’ can handle pipes with thickness upto 4-5 mm. Ergonomic and simple to handle. test Get a Quote Know More Description PSC EZY Lift is the new simple pipe lifting tool that’s designed to keep the wrist and hand in a neutral position and avoid strain, prevent pinched fingers and cuts from sharp surfaces, ergonomic design to avoid strain with proper body positioning and lifting. This is a CNC cut metal piece covered with a rubberized coating. We simulated the right way to lift and hold a pipe and the tool is accordingly done to allow a person to keep the wrist in neutral position. The alternative to holding a pipe at the entry and exit that could cause cuts.

< Back Taglines PSC Safeguider High-Viz Anti-Tangle Tagline Features High visibility orange coated end for easy safe grip and low light applications Quick attach and release Economical alternative to our Polyex PSC LoadGuiderTM Taglines High visibility, impact-resistant nylon casing Excellent control No knots, tangles or cut-offs No trip hazard or risk of being dragged Flexible for easy line storage Made in USA Free Tagline Grabber Hook for retrieving taglines with every 5pcs ordered Get a Quote Know More Description PSC SafeGuider High-Viz Anti-Tangle Taglines are specially designed to be a safe alternative to ineffective and hazardous rope when guiding a suspended load. PSC SafeGuider Hi-Viz taglines are tangle-resistant and knot free and feature a high visibility coat to repel corrosive material and can be seen in low-light situations. They always retain their shape and are easily rolled up for storage.

Explore PSC Hand Safety's latest hand-free safety products. Our newest products are PSC Pipe Stabbing Guide, PSC Guide-It Pipe Grab Tool, PSC Guide-It Load Handling Tool, PSC Guide-It Set Baack Tool, PSC GasGrab, and PSC Drill Pipe Connection Guide. New Products New products released this year. New Products PSC Pipe Stabbing Guide PSC Pipe Stabbing Guides are handling tools used in the oil and gas industry that help operators align two separate sections of drill pipe, tubing, or casing for male-to-female connections. The positive-grip handles keep hands clear of stabbing connections, providing an extra margin of safety to drilling personnel and decreasing the risk of damage to the pipe connection threads. Available in 3 sizes Pipe ID 3”, 5” and 5-1/2”. PSC Guide-It Set Back Tool PSC Guide-It Set Back Tool is a double U-shaped attachment, one forward facing and one rear facing to facilitate the stabilization of a suspended drill pipe of up to 5 ⁄ inches in a vertical position. Allowing easy exchange from a push / pull function, giving the user maximum control over the load. PSC Guide-It Pipe Grab Tool For use in the movement of a suspended larger pipe, drill tools, bulk hoses, and BOP service lines, the 10" Pipe Grab Tool perfectly complements the existing use of taglines by providing exceptional control of the load and flexibility to the handler in the movement and landing of large diameter pipe. PSC GasGrab The tool can be used for lifting & moving gas cylinders. It is made from Die-Cast Aluminum and is planned to be light (2kg) and rigid without compromising its strength. The durable, warm-touch coating improves operator safety and comfort. PSC Guide-It Load Handling Tool The V-shaped attachment of the tool engages with the corner of containers and baskets, allowing a suspended load to be stabilized by exerting a pushing action. Its unique angled design acts as a locking mechanism providing the handler with maximum control over the suspended load. Also, it has an angled U-shaped attachment that facilitates the 4" inch-box iron frames of open baskets and power packs. PSC Drill Pipe Connection Guide This tool consists of two identical parts that clamp around the drill pipe when operated by two personnel. This provides maximum stability for the drill stand when engaging with the stand set in the rotary slips. Each part is fitted with wrist lanyards to reduce any risk of dropping the tool down the hole while also fitted with a quick disconnect device to prevent any risks to personnel limbs associated with rotating equipment. Take a step towards improving safety Get a Quote

< Back Tagline Retriever Tools PSC Safeguider Tagline Retriever Tool Features The head has a serrated ‘S’ design aluminium tool that works on hooking principle on one end and a reverse hook on the opposite end which allows it to be used in both push and pull applications. In the other version, a ‘C’ head to help with the manoeuvring of slung loads A dielectric hardwood makes the product safe to use. The sand dipped in the grip area on the wooden pole allows for better grip while working with these tools. Available in various lengths – 2, 3, 4, 6 & 8 Feet Length. Get a Quote Know More Description These lightweight tools are used for the Hands-Free guiding and directing of heavy crane and forklift loads. This dielectric hardwood makes the product safe to use. The head has a serrated "S" head and a "C" head options depending on the requirement. The sand dipped finish in the grip area allows for better grip while working with these tools. Available in various lengths - 2, 3, 4, 6 & 8 Feet Lengths.

< Back Taglines PSC LoadGuider Anti-Tangle Taglines Features Made from SK 75 12 mm with 6 mm core (18 mm) Synthetic Rope offering remarkable strength and is light-weight Weaved over braided cover to prevent abrasion High visibility yellow color and color coded eyes for various lengths Helix spiral enhances grip even in wet conditions Dirt repellent cover and taglines can be washed if needed Tangle resistant Available in various lengths 15, 20, 25, 30, 35 and 45 feet Can outlast PP, Manila and other fibre ropes by several times Get a Quote Know More Description PSC Hand Safety LLP has brought in the PSC LoadGuiderTM safety tangle free Taglines to solve the problems associated with the use of PP ropes. These taglines are specifically designed for the hands free lifting applications. PSC LoadGuiders are tangle resistant as the centre rope is wrapped with an outer layer of smaller diameter ropes. This prevents the tagline from twisting and wrapping around objects or people. PSC LoadGuider Taglines are designed not to catch on pinch points, as there are no knots or raised surfaces. These are made in Iceland in technical cooperation with a major drilling operator. Now guiding a suspended load is easier, safer and faster! PSC LoadGuider Taglines are tangle resistant as it is designed with a rigid core and stiff cover braiding to prevent any turning on itself and wrapping around objects. The patented Helix spiral effect increases grip in wet and slippery conditions. The PSC LoadGuider Safety taglines are designed not to catch on pinch points, as there are no knots or areas to snag. Inside the Helix cover is Dynex 75 fibres giving them exceptional strength make it very lightweight for operator handling. A twist lock carabineer 50 mm gate opening as per ANSI Z359.12 can now be purchased for use with the PSC Taglines.

< Back Tagline Retriever Tools PSC Tagline Retriever Tool (TRT) Features The hook end is used at full extension (approximately 2.1m/7ft) to retrieve taglines hanging vertically without a load handler having to go too close to a suspended load. The rubber buffer is used to push against suspended loads to guide them, especially when landing loads in tight or congested spaces. Once again, this allows the operator to remain at a safe distance from the load until it has landed. The poles would normally be fully retracted (for rigidity) during this type of use where their length is 1.2m/4ft. They can be used half‐extended if required but if too much pressure is applied, they will telescope in. Get a Quote Know More Description The PSC Tagline Retriever Tool allows a worker to be at a much safer distance from the load when suspended. The rubber buffer in the tool works as a push/pull against suspended loads to guide them, especially when landing loads in tight or in congested spaces.

< Back Hands-Off Tools PSC Fingersaver Features Lightweight Affordable Easy to operate Peace of mind for self and co‐worker Simple tool to keep hands away from impact zones Vibration absorbing Non‐slip Rubber Grip Available in 3 sizes: PSC FingerSaver Compact # PSC-FS-295 PSC FingerSaver Standard # PSC-FS-350 PSC FingerSaver Long # PSC-FS-850 Get a Quote Know More Description PSC FingerSaver keeps the hands away from the impact of the hammer on the flogging spanner and from pinch points. The FingerSaver offers support to the tool equivalent to that of hands and fingers, it is designed carefully and examined on typical applications by the users where large spanners and flogging spanners are used on nuts and bolts.

PSC Hand Safety works with large industries to mitigate injuries in the workplace. We receive pictures from customers where hand injuries occur and then propose a comprehensive solution for mitigating hand injury risks in the workplace. Check out our latest projects and partnerships to stay updated! Projects PSC Hand Safety LLP works with large industries to mitigate injuries in the workplace. We receive the pictures and videos from customers of actual hands-on situations where injuries happen, follow that up with a Teams Meeting for understanding the requirements and then propose a comprehensive solution for mitigating hand injury risks in the workplace SubSea Expo - A Different World Altogether Subsea technologies have evolved over the last decade with a host of solutions for exploration and production from deepwater offshore. We are seeing extensive deployment of robotics and automation for speedier implementation of Subsea umbilicals, risers and flowlines projects in deepwater and ultra-deepwater, ROVs capable of diving to high depths and a whole lot of expertise based solutions for reliable production of energy offshore. Subsea technologies have evolved over the last decade with a host of solutions for exploration and production from deepwater offshore. PSC Hands-Free Tools to Guide and Manage Suspended Loads Getting Packed for Export to Ghana In 2014 PSC introduced a new way of maneuvering suspended loads by keeping hands away from pinch and crush injuries. The simple idea was to use tools that allow a person to stay away from the red zone that can result in caught-between or struck-by hazards and use Taglines and Push/Pull poles to maneuver and land a suspended load without bringing the hand to close proximity of the objects being handled. TubularGuider and Guide-It Safety Tools Reliable Hands-Free Safety Tools from PSC. Whether you need to guide suspended loads, push tubular, guide a load into position, or pull or push slung loads, PSC LoadGuiders, TubularsGuiders, and Guide-It Safety Tools enable you to perform the task safely without getting your hands too close to crush and injury zones. We just shipped these to Aberdeen and another shipment to Canada from where it goes to McDermott Mexico for use on their pipelay vessels. PSC's Loadguiders and Safeguiders 64 pieces of PSC Loadguider and PSC Safeguider Taglines getting ready to be shipped to Baku Azerbaijan coming week. The team worked through the weekend to get these ready within a few days of order. Kudos. We offer the most exhaustive range of push/pull poles, hands-off tools, and taglines you can find from one source. Looking to mitigate hand injury risks in your industry, talk to us. No one protects your hands better than we do!

All of the visual content used in this website are taken from the internet or the respective company’s website and are copyrighted to its respectful owners. All brand names, images, logos, and product designs are registered trademarks of their respective owners and are used for reference only. Legal All of the visual content used in this website are taken from the internet or the respective company’s website and are copyrighted to its respectful owners. All brand names, images, logos, and product designs are registered trademarks of their respective owners and are used for reference only.