Search Results

< Back Hands-Off Tools PSC Tubular Guider Features Pull back release knob to instantly form noose Non-slip rubber grips for greater control Cable runs through pole forming noose at other end Pole made from tempered durable tempered blue anodoised aluminium Slide control for instant release of noose Rubber protected pole head Instant release pin Large noose thick vinyl coated cable Get a Quote Know More Description Now use PSC TubularGuider to safely work with suspended tubular loads without getting injured due to pinch and crush related spots. The PSC TubularGuider® features non-slip grips, locking mechanism and super strong aluminium shaft. The Dual Release uses a spring loaded noose release to extend the cable through the tool to release the tubular or the slide control which instantly drops the noose from the tool. Available in 3 lengths- 3 feet, 4 feet & 5 feet

< Back Taglines PSC Guide It Safety Rigger Tagline Features Its swivel action allows the hook to rotate instead of twisting the tagline, hence enhancing safety during load guiding operations Its High viz feature provides better visibility of the rope in low light conditions Extremely lightweight, the special polyester fibres are reasonably tangle resistant and strong with their unique construction. PSC-Guide It Safety Rigger Taglines conform to EN 353-2:2002 – Personal Protective Equipment against falls from a height – Guided Type Fall Arresters including a flexible anchor line. Get a Quote Know More Description PSC Guide-It Safety Rigger Tagline is made of finest polyester fibers in 14mm diameter with a unique ultra-lightweight 25kN galvanized steel composite swivel hook that opens 2” making it easy to attach to the load and comes with a safety latch.

< Back Hands-Off Tools PSC Handle-Tech Pipe Lifter Features The Handle-Tech is extremely strong, has great electrical insulation characteristics and is practically impervious to heat and cold. The finished product is so strong it was tested to live over 1100 pounds, and the durability is just extraordinary. Available for 2, 3, 4, 5 & 6 inches pipes and hoses The Handle-Tech (Suction/Pumping) Hose Safety Handles are a ground breaking hand tool designed to improve safety and efficiency for manual handling of many types of industrial hose. Get a Quote Know More Description PSC Handle-Tech Pipe & Hose Lifters is the latest product in PSC’s Hands-Free safety range. In many industries, like fracking, for example, there might be dozens of guys dragging pipe and hose around the fields all day long. The hoses are usually too wide to get your hands around. They may be under high pressure, or even filled with hazardous gas or chemicals. The only way to move them is to bend down, hug them to your body and walk while dragging them – often over muddy, wet, slippery or icy terrain. It’s very awkward and unwieldy. You hear about a lot of hand injuries, back injuries, falls, hoses decoupling and hitting people, and other accidents. That’s how the tool was developed.

< Back Taglines PSC Safeguider High-Viz Anti-Tangle Tagline Features High visibility orange coated end for easy safe grip and low light applications Quick attach and release Economical alternative to our Polyex PSC LoadGuiderTM Taglines High visibility, impact-resistant nylon casing Excellent control No knots, tangles or cut-offs No trip hazard or risk of being dragged Flexible for easy line storage Made in USA Free Tagline Grabber Hook for retrieving taglines with every 5pcs ordered Get a Quote Know More Description PSC SafeGuider High-Viz Anti-Tangle Taglines are specially designed to be a safe alternative to ineffective and hazardous rope when guiding a suspended load. PSC SafeGuider Hi-Viz taglines are tangle-resistant and knot free and feature a high visibility coat to repel corrosive material and can be seen in low-light situations. They always retain their shape and are easily rolled up for storage.

< Back Hands-Off Tools PSC Load-It Features Light Weight Simple Design Mantains control Keep hands away from injury Custom made S-head/M-head Available in lengths (in feet) - 2, 4, 6, 8, and 10 feet Get a Quote Know More Description The PSC Load-It Positioning Tool can be used for a multitude of jobs like an extension of hand to move, push or reposition nsuspended items and equipment, grab taglines, wire cables or slings, safely guide, maneuver and position loads like gratings, finished steel products mastewr links, flanges and other heavy components. PSC Load-It also ensures relaxed body posturing while usage to reduce the risk of back injuries due to manual load stress. PSC Load-It Mag Head Tool The PSC Load-It Mag Head Tool (PSC-LIT-MAG008) is a 4 feet fiber glass pole with a pivoting magnet (rated for #80 lbs.) to guide steel plates and steel structural products. This is an extendable telescopic pole that extends up to 8 feet long. It has a threaded locking mechanism which can be used to lock at any length until it gets unthreaded induced by a massive push load.

< Back Push/Pull Tools PSC Loadguider Push/Pull Tool Features Extremely lightweight, equipped with an ergonomic non- slip D handle Material - Fiberglass, Plastic, Nylon Tested to 300 kgs Push & 150 kgs Pull Loads Available in 4 lengths 42", 50", 72", 96" Get a Quote Know More Description The PSC LoadGuider Push/Pull Tool helps to mitigate the risk of pinching or crushing hands & feet while handling suspended loads or maneuvering loads in tight positions until the load is in its final placement/resting position. The tool is simple to handle and allows user to guide a suspended load from a distance, either with push or pull activities. The PSC LoadGuider Tool also avoids unnecessary strain on the wrists during maneuvering operations and protects from cuts, pinches, abrasion, lacerations, etc. thus improving hand safety. When handling suspended loads or manoeuvring loads in tight spaces, the PSC LoadGuider Tool helps to reduce the risk of pinching or crushing hands and feet until the load is in its ultimate placement/resting position. The tool is easy to use and allows the user to guide a hanging load from a distance, either by pushing or pulling.

< Back Tagline Retriever Tools PSC Safeguider Tagline Retriever Tool Features The head has a serrated ‘S’ design aluminium tool that works on hooking principle on one end and a reverse hook on the opposite end which allows it to be used in both push and pull applications. In the other version, a ‘C’ head to help with the manoeuvring of slung loads A dielectric hardwood makes the product safe to use. The sand dipped in the grip area on the wooden pole allows for better grip while working with these tools. Available in various lengths – 2, 3, 4, 6 & 8 Feet Length. Get a Quote Know More Description These lightweight tools are used for the Hands-Free guiding and directing of heavy crane and forklift loads. This dielectric hardwood makes the product safe to use. The head has a serrated "S" head and a "C" head options depending on the requirement. The sand dipped finish in the grip area allows for better grip while working with these tools. Available in various lengths - 2, 3, 4, 6 & 8 Feet Lengths.

< Back Tagline Retriever Tools PSC Tagline Retriever Tool (TRT) Features The hook end is used at full extension (approximately 2.1m/7ft) to retrieve taglines hanging vertically without a load handler having to go too close to a suspended load. The rubber buffer is used to push against suspended loads to guide them, especially when landing loads in tight or congested spaces. Once again, this allows the operator to remain at a safe distance from the load until it has landed. The poles would normally be fully retracted (for rigidity) during this type of use where their length is 1.2m/4ft. They can be used half‐extended if required but if too much pressure is applied, they will telescope in. Get a Quote Know More Description The PSC Tagline Retriever Tool allows a worker to be at a much safer distance from the load when suspended. The rubber buffer in the tool works as a push/pull against suspended loads to guide them, especially when landing loads in tight or in congested spaces.

< Back Taglines PSC LoadGuider Anti-Tangle Taglines Features Made from SK 75 12 mm with 6 mm core (18 mm) Synthetic Rope offering remarkable strength and is light-weight Weaved over braided cover to prevent abrasion High visibility yellow color and color coded eyes for various lengths Helix spiral enhances grip even in wet conditions Dirt repellent cover and taglines can be washed if needed Tangle resistant Available in various lengths 15, 20, 25, 30, 35 and 45 feet Can outlast PP, Manila and other fibre ropes by several times Get a Quote Know More Description PSC Hand Safety LLP has brought in the PSC LoadGuiderTM safety tangle free Taglines to solve the problems associated with the use of PP ropes. These taglines are specifically designed for the hands free lifting applications. PSC LoadGuiders are tangle resistant as the centre rope is wrapped with an outer layer of smaller diameter ropes. This prevents the tagline from twisting and wrapping around objects or people. PSC LoadGuider Taglines are designed not to catch on pinch points, as there are no knots or raised surfaces. These are made in Iceland in technical cooperation with a major drilling operator. Now guiding a suspended load is easier, safer and faster! PSC LoadGuider Taglines are tangle resistant as it is designed with a rigid core and stiff cover braiding to prevent any turning on itself and wrapping around objects. The patented Helix spiral effect increases grip in wet and slippery conditions. The PSC LoadGuider Safety taglines are designed not to catch on pinch points, as there are no knots or areas to snag. Inside the Helix cover is Dynex 75 fibres giving them exceptional strength make it very lightweight for operator handling. A twist lock carabineer 50 mm gate opening as per ANSI Z359.12 can now be purchased for use with the PSC Taglines.

< Back Hands-Off Tools PSC Lift Assist Manual Lifting Aids Features Lightweight Affordable Simple to use Available in 3 variations: PSC Single Hande Lift Assist Sling # PSC-SH-75 75 kg WLL 50 mm x 900 mm PSC Double Handle Lift Assist Sling # PSC-DH-100 100 kg WLL 50 mm x 1500 mm PSC Choke Valve Safe Lift Assist # PSC-CV-50 50 kg WLL 25 mm width Get a Quote Know More Description A new range of PSC Hands‐Off policy tools (Lift Assist Manual Lifting Aids) prevents back pain problems from bending, and simultaneously improves ergonomics in workplace. It also reduces possible chances of hand and finger injuries associated with lifting and carrying the small equipment with bare hands.

< Back Push/Pull Tools PSC Guide-It Safety Tool Features Lightweight (less than 2 kgs), equipped with an ergonomic non- slip D handle. Material - robust fiberglass pole with a nylon head Available in 4 sizes- 42", 50", 72", & 96" Get a Quote Know More Description PSC Guide-It is a simple easy to use Hand-Safety Tool to keep hands and feet away from pinch and crush injuries when guiding suspended loads. A robust fiberglass pole with a nylon head allows personnel to push and guide suspended loads to its final place, without taking them to close to the load to avoid a caught-between struck-by hazards. PSC Guide-ItTM Hand Safety Tool assists in “Hands-Free” Guiding, spotting and landing suspended loads, manoeuvring drill pipe and all types of tubular on pipe racks or on the platform, snagging taglines and sling legs, etc. PSC Guide-ItTM Hand Safety Tool assists personnel to manoeuvre and guide suspended loads while avoiding pinch points and crush points. With the use of these tools workers do not place themselves in danger by working in an unsafe proximity to hazardous suspended loads.

< Back Hands-Off Tools PSC Chisel and Punch Holder Features Tool holder's handle efficiently resists sparks and absorbs vibration Hassle‐free adjustments with the knob at base Accommodates chisels measuring up to 1" in diameter Get a Quote Know More Description PSC Chisel And Punch Holder Tool is ergonomically designed to provide a comfortable-firm grip, keeping in mind the problems and difficulties faced by the workers with the chisel application.